GSM Alarm controller

0
1
2

Purpose

Controller is designed for intrusion, fire, panic, emergency and other types of alarm systems and “Smart Home” system.

Description

  • оallows registration and processing of 30 wireless sensors;
  • controller setup and control is carried out using:
  • The controller is powered from three independent sources in any combination:
    • from the main power supply with a nominal voltage of 12 V through terminals + 12V-,
    • from a backup power source with a nominal voltage of 12 V through terminals + 12VR-,
    • from an in-home network of 230 V 50 Hz through the network adapter (not included) and a USB 2.0 type B port 5V/1A. To connect the network adapter with the controller, USB cord of AM/BM type is used;
  • Backup power is provided by lithium-ion (Li-Ion) rechargeable battery (BAT) of size 2/3 A with a nominal voltage of 3.7 V and capacity of up to 700 mA/h (not included).
  • The controller has:
    • a built-in Touch Memory (TM) input for connecting an iButton key reader and/or Astra-KTM-S keypad.
    • 4 programmable inputs/outputs (+ CON1-, + CON2-, + CON3-, + CON4-) for connecting wired sensors or sirens;
    • 2 optic relays to connect light and sound alerters;
Radio channel characteristic:  
operating frequency 434,42 MHz (letter "3")
wireless coverage range  (line-of-site), not less than* 100 m
Power supply from external source of 12 V:  
voltage of the main (terminals + 12V-) and backup (terminals + 12VR-) power from 10.5 to 13.6 V
maximum current consumption 300 mA
rated current consumption, not more 150 mA
Power supply via USB adapter:  
mains voltage from 110 to 240 V
power consumption, not more 5 W
power supply voltage 5 V ± 5%
maximum current consumption, not more 500 mA
rated current consumption, not more 200 mA
BAT power:  
battery supply voltage from 3.3 to 4.2 V
battery life from 4 to 8 h
battery discharge information transmission threshold 3,5 V
charge time of a fully discharged battery, not more 10 h
Resistance of intrusion/technological type AL, (terminals + CONx, 12V- or 12VR-):  
normal from 3 to 5 kOhm
violation from 0 to 3 or more than 5 kOhm
Resistance of fire type AL, (terminals + CONx-):  
normal from 3 to 5 kOhm
violation from 1.5 to 3 and from 5 to 12 kOhm
fault from 0 to 1.5 or more than 12 kOhm
Resistance of fire type AL in double event mode, (terminals + CONx-):  
normal from 3 to 5 kOhm
violation from 0 to 1.5 or from 5 to 12 kOhm
fire danger (with resistor Radd) from 1.5 to 3 kOhm
fault more than 12 kOhm
Relay parameters: (RELAY 1, RELAY 2 terminals):  
maximum load voltage 100 V
maximum load current 0,1 A
Open collector output  parameters (terminals CONx-):  
- maximum load voltage 24 V
- maximum load current 0,25 A
technical readiness time, not more 60 s
maximum length of the Touch Memory (ТМ) interface line 15 m
overall dimensions 136x86x38 mm
weight without battery 0,14 kg
Operating conditions:  
- temperature range from -20 to +55 °С
- relative humidity (noncondensing) up to 98% at +25 °С

* Wireless coverage range significantly depends on the design features of the protected facility, jamming environment. Maximum wireless coverage range are provided when the best conditions for the installation of SH and the sensor are met.

Features

  • three two-color LED indicators:
    • "POWER" - displays status of power supply and protection,
    •  “WIRELESS NETWORK” - sensors general status,
    • "CONNECTION" - server connection status;
  • LAN network interface (Ethernet 10/100 Base-T) for data exchange with mobile and web applications through the public server;
  • wireless channel via SIM-card (GPRS/EDGE) of the GSM mobile operator for the data exchange with the mobile and web applications through the public server.

Войти

Заказать в 1 клик