Door sensor

0
1
2

Purpose

Designed for protection against unauthorized access into protected area through doors or windows openings and generating an alarm signal.

Description

  • ability to connect external wired sensors, the wire length shall be not more than 3 m;
  • tamper control;
  • battery discharge control;
  • work-ready out of the box - the battery is included;
  • battery life up to 7 years;
  • 2 operating frequencies;
  • registration in the Security Hub controller after installing the battery using Setup Wizard in the mobile application.

Application

Included in the starter kit and the kit with camera for door/window opening control while you are out of the facility.

Operating principle

The sensor consists of a main (reed relay) part and control magnet in the case. When in normal status, both parts are closed and the magnetic field acts on the reed relay. When a window and/or door is opened, the magnet is moved away from the reed relay, and an alarm message is generated, which is sent to the Security Hub controller. The alarm message is displayed in the user's mobile application.

Installation and setup

  • without wires and changes in door/window design;
  • fastening on wall plugs (self-tapping screws) or double adhesive tape.
Parameter Value
Maximum number of actuations of the magnetically operated contact 1000000
Activation distance from 20 to 30 mm
Recovery distance from 13 to 23 mm
Power supply voltage 2, 8-3,6 V
Transmitter power, not more 10 mW
Overall dimensions 109х34х27 mm
Operation frequency  
- letter 1 433,42 MHz
- letter 3 434,42 MHz
Current consumption  
- with transmitter off 0,025 mA
- with transmitter on 25 mA
Zone input parameters  
- voltage on terminals in duty mode 2,5 V
- Zone input current for supplying detectors, not more 35 µA
Operation conditions  
Temperature from -20 to +50 °С
Relative humidity (noncondensing) up to 98% at +40 °С
Ingress protection level IP41

Войти

Заказать в 1 клик