Temperature sensor

0
1
2

Purpose

Sensor is designed to measure temperature and transmit the temperature values to the Security Hub controller

Description

  • Ability to connect an external wire temperature sensor DS 18V20 (not included). Maximum wire length - 3 m;
  • the temperature values are transmitted at intervals of 12 s or 60 s, jumper selection;
  • registration in the Security Hub controller after installing the battery using Setup Wizard in the mobile application;
  • Battery size AA, 3.6V included;
  • battery life up to 5 years;
  • battery discharge control;
  • 2 operating frequencies;
  • tamper control.

Application

Sensor works as part of the Security Hub alarm system.

Sensor can help you to maintain the required temperature in the house or in a particular room, controlling the heating boiler or individual heaters.

Operating principle

Sensor operating principle is based on the ambient temperature registration by the internal temperature sensor. The sensor periodically (each 12 s or 60 s) transmits the measurement results to the Security Hub controller via radio. The temperature value is displayed in the user's mobile application.

If there is a DS 18B20 external temperature sensor connected, the measurement results are transmitted alternately from each sensor.

Installation and setup

  • without wires;
  • mounted with wall plugs (self-tapping screws), double adhesive tape or placed without mounting
Parameter Value
Temperature range measured by a built-in sensor from -30 to +55 °С
Temperature range measured by an external sensor from -55 to 125 °С
Temperature measurement error 1°С
Operation frequency  
- letter 1 433,42 MHz
- letter 3 434,42 MHz
Overall dimensions 109x34x27 mm
Operation conditions  
Temperature from -30 to +55 °С
Relative humidity (noncondensing) up to 95% at +40 °С
Ingress protection rating IP41

Войти

Заказать в 1 клик